:: Worm Reduction Gearbox ::

   Worm Reduction Gear Boxes are normally manufactured with size from
   1.125 to 14 inch based on center distance. Each size has ratios from 5:1
   to 70:1 in case of single reduction gearboxes. CPEC offers up to 4900:1
   ratio by combine double reduction gearboxes. These gear boxes are
   capable of transmitting power from fractional horsepower to 165 HP. The
   design parameters of worm and wheel are in accordance British Standard
   BS-721-1963.

   The range includes variety of drives in following designs like R, RI, RV,
   RARV, RVS, SRV.

   R type = Standard under driven
   RI type = Standard over driven
   RV type = Vertical out put shaft
   RARV type = Vertical output shaft with bearing support for agitator application
   RVS type = Vertical output shaft for std stirrer application
   SRV type = Special vertical output shaft for heavy duty stirrer application
   D Mounting type = Vertical input shaft type

   :: Worm Wheel Sets ::

   Different types of standard and special Worm & Worm wheels as per    customer's requirement are manufactured.   

  
   :: Hollow shaft Worm Reduction Gearbox (SMWG) ::

   These are Standard worm gearboxes with hollow Output shaft. We also
   supply Flange on output side or torque arms to facilitate easy mounting.
   The gearbox size from 40 to 120 and ratio from 5/1 to 70/1.

   :: JPMW ::

    JPMW is a range of compact, low torque worm geared motor with hollow
   input and hollow output shaft having power rating from 0.18 Kw to 4.0 Kw
   and ratios from 5:1 to 70:1

   
    :: JPMH ::

   These are the combinations of Helical and a Worm Gears which Gives us
   more efficiency, with the advantage of Varity of mountings and very
   compact Designs over Worm Reduction Gearboxes.

   JPMH is a range of helical-worm geared motors having power rating from
   0.07Kw to 1.93 Kw ratios from 45:1 to 308:1 with hollow or solid output
   shaft.

   :: Power Master ::

   PM is a range of high torque worm geared motors having power ratings
   from 0.5Kw to 43.5Kw and ratios from 8:1 to 307:1, with hollow or solid
   output shaft.

   
  
   :: Inline Helical Motors ::

   Inline Helical Geared Motor is combinations of Helical Gearbox and Electric
   Motor as one unit to give compactness and strength to meet most of the    requirements where input and output shafts are co-axial having power
   rating from 0.25Kw to 45Kw.  

   :: Parallel Shaft Helical Gearbox ::

   ‘CPEC’ manufacture custom-built Parallel Shaft Helical Gearboxes in Single,    Double, Triple & Quadruple configurations to suit individual requirements. 
   These are Shaft mounted as well as foot mounted Gearboxes.

   The gearboxes are capable of transmitting power up to 2000HP, The ratios    offered are 1.2:1 to 800:1 and both C.I or fabricated casing can be offered.  

    :: Lift Duty Gearboxes and Lift Machines ::

   ‘CPEC’ manufacture special Lift duty worm Gearboxes for Passenger/
   Industrial Lifts for major Lift manufacturers.  The ratios are 25:1 to
   40:1 and size 4 to 12    center distance Lift Gears are normally of

   ‘R’ type and Lift Machines are fabricated to suit specifications of
   Elevator manufactures.

   
    :: Aerator Gearboxes ::

   Specially designed Gearboxes for surface Aeration plants and Water
   Treatment plants are manufactured by us. The power rating from 5HP to
   75HP for 2 or 1.5 service factor. We also offer Customer-made output
   rigid coupling halves.  

   :: Extruder Gearbox ::

   Variety of Extruder Gearboxes for plastic industry from 3HP to 50HP Input
   with standard ratios are manufactured by us.  The main feature is internal
   thrust bearing on customized hollow output shaft and barrel adopter.

   
   :: ACVS & MCVS pulley ::

   Manual and Automatic controlled variable speed pulleys to achieve
   infinitely variable output speeds and suitable for Fractional HP to 20HP
   are manufactured by us.

   The speed variations ratio of ACVS pulleys are 2:1,3:1,4:1 suitable for
   Fractional HP to 20HP and MCVS pulleys are 8:1 suitable for Fractional
   HP to 8 HP.

   :: Special Drive Systems (central clariflocculator and
   peripheral) for Effluent and Treatment Plants ::

   For specific applications of high output torque and low output speeds,
   we have, over last 30 years, designs and manufactured a large range
   of these drives.